613 electricians in Luxembourg

Certain signs should not be ignored. Repeated tripping of the breaker with no obvious cause, an old consumer unit with screw-in or porcelain fuses, a burning smell near a socket, or a missing earth connection found during a survey are all reasons for priority attention.

A plan for an EV charging station, a house extension, converting an attic, or adding a fitted kitchen with several dedicated circuits are also common triggers.

Buying an older property is another frequent occasion to call an electrician, either before or shortly after signing, for a condition survey of the installation. A consumer unit with screw-in fuses or an installation lacking a residual-current device per circuit points to a dated setup, even if the property otherwise looks well kept.

An alarm or video surveillance project also falls to the electrician when the wiring must be integrated into the existing installation, particularly for powering outdoor cameras or the control keypad.

A project generally follows the same stages, whether it is a consumer unit renovation or a charging station installation.

The price of an electrical project depends on several factors, and a generic figure means little without a site visit.

The size and layout of the property, the number of circuits and light points, the condition of the existing installation (wiring to keep versus fully replace), the accessibility of walls and attics, the complexity of the chosen home automation, the power rating of the charging station, and the distance between the consumer unit and the charging point are all variables.

The type of consumer unit (number of rows, multiple residual-current devices), whether an earth connection already exists, and the use of specific materials (fire-resistant cables, quality surface-mounted trunking) also affect the final amount.

Home automation adds another variable: a simple lighting control system costs noticeably less than an integrated setup controlling heating, shutters, alarm and lighting from a single interface. The choice between wired and wireless also affects installation time and therefore labour cost.

Any price range given before a site visit should be treated as an indicative range, to be refined after the survey.

A simple consumer unit replacement in an average-sized home sits, as an indicative range, well below a full rewiring in an older house. Adding a charging station mainly depends on the distance between the consumer unit and the desired location, and whether an outdoor trench is needed.

Several schemes can reduce the cost of an electrical project linked to the energy transition or to home renovation.

The Klimabonus Wunnen, which replaced the former PRIMe House programme in 2022, can apply to the installation of an EV charging station, under conditions, and covers certain energy renovation works, including electrical work linked to energy efficiency. Additional municipal grants exist depending on the municipality of residence. The 3% reduced VAT rate for housing can apply under conditions to renovation work in a home used as a main residence.

The conditions and amounts of these schemes change regularly. Up-to-date information, forms and simulators are available on guichet.lu, myenergy.lu and klima-agence.lu. An electrician can indicate whether a task falls within the scope of a scheme, but the application itself remains the client's responsibility.

Some grants require the work to be carried out by a licensed professional and require a detailed invoice, sometimes a compliance inspection report. It is best to check eligibility before signing a quote rather than after work has started.

Check that the company holds a business licence from the Chamber of Skilled Trades for the electrician trade. Ask for a written, itemised quote separating materials, labour and any call-out fees.

Compare several quotes for a full renovation or a home automation project, as technical approaches and equipment brands can vary significantly. Ask whether the company arranges the compliance inspection with the approved body itself or whether that is left to you.

Reviews from past clients, where available, give a useful indication of how well deadlines and site cleanliness are respected, two criteria as important as price for a renovation touching the whole home.

For a charging station, check that the company is used to filing the declaration with the network operator and understands the power limits of the existing meter.

An experienced electrician clearly explains the technical choices: type of consumer unit, brand of residual-current devices, cable size selected. They should also give a realistic timeline, including the wait for the compliance inspection, rather than an optimistic one that ignores this step.

Underestimating the state of the existing consumer unit by only renovating part of the installation, leaving risks on the untreated circuits.

Having electrical work done by an unlicensed person to save on labour, which risks a failed compliance inspection or even a risk to people and property.

Forgetting to declare a charging station or a photovoltaic installation to the network operator, which can delay commissioning or cause problems when reselling the property.

Choosing home automation equipment without checking its compatibility with the existing installation and the household's actual needs, risking an underused system.

Adding sockets and light points without planning circuit distribution, which can leave the consumer unit undersized as soon as the home is extended in the future.

Neglecting the available power margin on the meter when adding a charging station, which may require a request to the network operator to increase capacity.

Putting off the compliance inspection thinking it can be done later: an installation energised without approval is a safety risk and complicates later dealings with insurers or the network operator.

Underestimating the waiting time for the approved body's visit when planning a move or a handover, which can delay moving in if this delay is not factored into the quote.

As sensitive electronics become more common in the home, from heat pump controls to photovoltaic systems and home automation, surge protection is becoming more important. A surge protection device fitted in the consumer unit protects the whole installation against voltage spikes, for example from a nearby lightning strike or switching events on the grid, whereas individual socket-mounted protectors only cover the devices plugged into them.

When renovating the consumer unit, it is worth discussing surge protection with the electrician, particularly if a photovoltaic system, a heat pump or extensive home automation is planned. External lightning protection on the building itself is a separate measure, more relevant for detached, exposed buildings or at the explicit request of the owner, and should be considered separately from standard electrical work.

Protecting network equipment, such as a fibre termination point mounted in the basement or a router in the living area, can also be worthwhile when cables run over longer distances outside the building. The electrician can assess during the site visit whether additional protection is justified for the situation.

Households with a photovoltaic system or several connected devices also benefit from a periodic visual check of the consumer unit, to catch early signs of overheating or wear on protective devices, even outside the scheduled compliance inspection.

Vert.lu is a matching platform. You describe your electrical project once, and the request is forwarded to electricians in the network matching your location and the nature of the work.

You then receive quotes from several companies and freely choose which one to work with. The service is free for homeowners, with no commitment and no hidden fees.

Vert.lu charges homeowners nothing and takes no commission on quotes received. The platform only handles matching; the contractual relationship is formed directly between you and the electrician you choose.

Whether your project is a simple consumer unit replacement, a full home automation setup, or a charging station, describing your needs precisely in the initial request helps electricians prepare a more relevant quote from the first visit.

You can submit this request from a page dedicated to your locality or from the page for the specific service, depending on how you prefer to present your project.